- Radar Sensor
- >
- Distance Measuring Meter Monitoring Transducers Radar Liquid Level Sensor Oil Gas Tank Water Water Level Indicator Transmitter
Distance Measuring Meter Monitoring Transducers Radar Liquid Level Sensor Oil Gas Tank Water Water Level Indicator Transmitter
SKU:
$0.00
Unavailable
per item
Your browser does not support viewing this document. Click here to download the document.
Specification
Range: 0~7m;
Material: stainless steel;
Accuracy: ±1mm;
Power supply voltage: 3.3-5.5VDC, 5-24VDC;
Beam Angle: 5°, 10°, 20°;
Environment: Constant acid and base;
Interface type: RS485 /UART (TTL) /0 ~10V /4 ~20mA;
Measuring Medium: Fluid: Water, Oil, Tank, Fuel,Gas;
IP Rating: IP67;
Operating current: ≤35mA;
Resolution: 1mm;
Operating temperature: -35℃ ~ +80℃;
Storage temperature: -40℃ ~ +80℃;
Operating humidity: <95%;
Collection interval: 100ms to 10s (can be set);
Software features: Support for sensor parameter setting;
Overcurrent protection: Have overcurrent protection;
OVERVIEW
It is the use of millimeter wave radar detection technology independent research and development of high quality products, the use of pulse coherent working mode, covering a variety of measuring distance, while with high precision, low power consumption, small size, high stability and other characteristics, small beam Angle, energy concentration, so that it has a stronger anti-interference ability, greatly improve the measurement accuracy and reliability.
It can work all day long, not affected by dust, smoke, light, temperature, gas and other external factors, suitable for liquid level measurement, level measurement, parking space detection, robot obstacle avoidance and other fields. It has strong penetration, good concealment, does not affect the appearance, and the use of on-site calibration without calibration, ready to install.
The shell design of different materials can prevent the corrosion of strong acid and alkali, and the IP67 waterproof grade is fully sealed. Interface type is divided into digital and analog, support Modbus communication protocol and serial protocol, compatible with most RTU communication protocols on the market.
PRINCIPLE
Millimeter wave radar transmits linear frequency modulation pulse signal, meets the target after the reflection echo, calculates the target distance by analyzing the delay of the echo signal.
FEATURES
1. Non-contact measurement, not easy to be corroded by sewage, high precision, high stability, high resolution
2. Low power consumption, small size, strong anti-interference, good stability, easy maintenance;
3. Strong penetration, fog, dust, smoke and other environments are not affected;
4. It is very easy to access embedded systems, and compatible with most RTU communication protocols on the market;
5. Built-in temperature sensor, double temperature compensation;
6. Fully sealed IP67 high grade waterproof design;
7. Simple structure, small size, very suitable for the installation and maintenance of small channels;
8. Suitable for low dielectric constant measurement;
9. Small beam Angle, energy concentration, stronger anti-interference ability, greatly improve the measurement accuracy and reliability;
10. High signal-to-noise ratio, smaller measuring blind area, shorter wavelength, for small volume measurement has a good effect;
11. Pulse coherent working mode, can be installed in a variety of metal or non-metal containers, no harm to the human body and the environment;
12. Easy to install, no need to open holes can be installed, good concealment, does not affect the appearance;
13. Support RS485(Modbus), UART(TTL), 0~10V and 4-20mA output types;
14. Configuration of the port module, convenient field debugging and testing;
15. Configure the upper computer software, you can read and set parameters, view the original data and measurement data, no disassembly firmware update;
Range: 0~7m;
Material: stainless steel;
Accuracy: ±1mm;
Power supply voltage: 3.3-5.5VDC, 5-24VDC;
Beam Angle: 5°, 10°, 20°;
Environment: Constant acid and base;
Interface type: RS485 /UART (TTL) /0 ~10V /4 ~20mA;
Measuring Medium: Fluid: Water, Oil, Tank, Fuel,Gas;
IP Rating: IP67;
Operating current: ≤35mA;
Resolution: 1mm;
Operating temperature: -35℃ ~ +80℃;
Storage temperature: -40℃ ~ +80℃;
Operating humidity: <95%;
Collection interval: 100ms to 10s (can be set);
Software features: Support for sensor parameter setting;
Overcurrent protection: Have overcurrent protection;
OVERVIEW
It is the use of millimeter wave radar detection technology independent research and development of high quality products, the use of pulse coherent working mode, covering a variety of measuring distance, while with high precision, low power consumption, small size, high stability and other characteristics, small beam Angle, energy concentration, so that it has a stronger anti-interference ability, greatly improve the measurement accuracy and reliability.
It can work all day long, not affected by dust, smoke, light, temperature, gas and other external factors, suitable for liquid level measurement, level measurement, parking space detection, robot obstacle avoidance and other fields. It has strong penetration, good concealment, does not affect the appearance, and the use of on-site calibration without calibration, ready to install.
The shell design of different materials can prevent the corrosion of strong acid and alkali, and the IP67 waterproof grade is fully sealed. Interface type is divided into digital and analog, support Modbus communication protocol and serial protocol, compatible with most RTU communication protocols on the market.
PRINCIPLE
Millimeter wave radar transmits linear frequency modulation pulse signal, meets the target after the reflection echo, calculates the target distance by analyzing the delay of the echo signal.
FEATURES
1. Non-contact measurement, not easy to be corroded by sewage, high precision, high stability, high resolution
2. Low power consumption, small size, strong anti-interference, good stability, easy maintenance;
3. Strong penetration, fog, dust, smoke and other environments are not affected;
4. It is very easy to access embedded systems, and compatible with most RTU communication protocols on the market;
5. Built-in temperature sensor, double temperature compensation;
6. Fully sealed IP67 high grade waterproof design;
7. Simple structure, small size, very suitable for the installation and maintenance of small channels;
8. Suitable for low dielectric constant measurement;
9. Small beam Angle, energy concentration, stronger anti-interference ability, greatly improve the measurement accuracy and reliability;
10. High signal-to-noise ratio, smaller measuring blind area, shorter wavelength, for small volume measurement has a good effect;
11. Pulse coherent working mode, can be installed in a variety of metal or non-metal containers, no harm to the human body and the environment;
12. Easy to install, no need to open holes can be installed, good concealment, does not affect the appearance;
13. Support RS485(Modbus), UART(TTL), 0~10V and 4-20mA output types;
14. Configuration of the port module, convenient field debugging and testing;
15. Configure the upper computer software, you can read and set parameters, view the original data and measurement data, no disassembly firmware update;